Trailer mounted controllers are splash proof but should be installed in an enclosure to prevent excessive water damage. Controllers are not submersible.
Mount on the trailer. Just 4 wires to connect.
BLACK WIRE - Connect to Battery via 20 amp fuse
RED WIRE - Connect to brake lamp active.
BLUE WIRE - Connect to brakes - positive.
WHITE WIRE - Connect to brake lamp negative - negative.
If you have multiple vehicles towing your trailer with electric brakes then this Brake Controller is ideal.
Click here for Trailer Brake Controller Installation Instructions.
Note: We recommend that a licensed repair facility install Brake Controllers. Some buyers return the unit claiming that it is not working. In most instances a blown diode is the cause of this unit not working. Crossed wires cause diodes to blow. There is no warranty claim in this instance.
DIY installation voids warrantee. Brake controllers should be installed by an Auto Electrician or authorised brake controller installer.
Trailer Mounted brake controllers are guaranteed for 12 months when installed by Auto Electricians or Authorised trailer repair centres.
To become an authorised repair centre please call or email Bruce Day.
Warning: Incorrect wiring will damage diodes causing the brake controller to fail. It is common for most brake controllers to fail when wired incorrectly.
