Description

LED Side Marker Light

LED side marker light. Trailers over 2100mm in width must have reflectors AND side marker lights attached to the sides of the trailers.

Suitable voltages are 9v to 33v

Dimensions 25mm x 50mm x 30mm

Reflectors are mounted

To the rear of the mudguard – Red
To the front of mudguard – Amber

In addition, trailer over 2100mm in width must carry side marker lamps.

These lamps are attached to the side of the trailer mudguard and are illuminated at night.

Associated lighting equipment

Quite often installing new lights causes the tow vehicle to flicker. Flickering is a serious problem as the onboard computer will be reporting the problem to your dash.

Installing an ECU to bypass the vehicle computer fixes flickering indicator light problems. Purchase ECU’s here

The onboard computer is measuring resistance, wattage and voltage drop to the newly installed lamps. It is quite likely the new lamps fall outside the computer specifications.

The best remedy, used by many tow bar installers, is to install a new ECU (electronic control unit) to control the LED light kit.

In 100% of cases, installing the ECU fixes problems with the vehicles flickering lights.

Couplemate Trailer Parts sells only the best quality LED Side Marker Light and caravan spare parts throughout Australia.

Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon January 9, 2018. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.

Additional information

Weight	0.1 kg
Dimensions	10 × 6 × 6 cm

LED Side Marker Light

Description