Front Hangers for Slipper Springs

Front Hangers for Slipper Springs

Front Hangers for Slipper Springs can be categorised into three sizes:

• 45mm wide x 6mm Springs – 1/2″ Bolt
• 45mm wide x 6mm Springs – 9/16″ Shackle Bolt
• 60mm Wide Springs – 5/8″ Shackle Bolt

The eye on the front slipper spring use 1/2″, 9/16″ or 5/8″ nylon replacement bushes.

Slipper Spring Hanger Kits

45mm Slipper Hanger Kits suited to single axle trailers up to 1000kg.

Use only on 6mm springs with 3 leaf tails. (765mm eye to tail)

Important the hangers for 45mm Slipper Springs are installed 700mm from centre of eye to centre of the back hanger. Hangers installed greater than 700mm centres will cause the rear leaf to jump out under shock loading conditions like deep potholes in the road. Hangers installed closer than 700mm centres will cause the spring to lock in the rear hanger and break.

• Bolts supplied are 1/2 inch.
• Most 6mm springs have 1/2 inch ID bushes with 22mm OD.

Wrong hanger location cause Spring Problems.

For 60mm Slipper Hanger Enquiries or any other enquiries, please give our sales team a call. We would love to help you out!

Couplemate Trailer Parts sells only the best quality 45mm Slipper Hanger & Kits for Single Axle / Tandem Axle and caravan spare parts throughout Australia.

Customers are welcome to either pick up or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.