45mm x 8mm x 710mm Slipper Spring Heavy Duty
45mm x 8mm x Slipper springs 45mm wide with 8mm leaf springs are suitable for highway travel, while 60mm springs are suited to high-speed travel and heavier trailer loads.
This spring style has the traditional eye and spring forming a tail that slides in a keeper or hanger welded to the trailer’s chassis.
Denso Tape has corrosion resistance to springs – 50mm x 10mtr
Slipper Spring Specifications
- 710mm Eye to Tail.
- 45mm wide x 8mm thick leaves
- 9/16 inch x 7/8 inch x 45mm bush.
- Free Camber 150mm
- Eye to Centre Bolt 330mm
- Hanger Centres 670mm
Pro Tip: It is not uncommon to see Denso tape wrapped around springs on commercial fishers’ trailers. We have witnessed Denso tape on trailer springs for the last 20 years. However, many buyers prefer to buy Galvanised springs.
Rated caravan and trailer Slipper springs at 120% of full load for all single, tandem and tri-axle sets.
For example, a tandem trailer weighing 2,000kg x 120@ = 2,400kg
Axles, leaf springs, and associated equipment must be rated at 2,400 kilograms.
Where is the rear hanger located?
Three key factors are essential for correctly locating the tyre on the trailer and installing the leaf spring.
- Locate the spring centre bolt in the centre of the wheel arch.
- Install the front hanger at a location that centres the spring in the wheel arch.
- Lastly, the rear hanger is positioned halfway along the Slipper section.
The Slipper tail must have enough room in the keeper to allow the spring to compress and rebound safely.
Leaves of the spring and spring ratings are as follows:-
- 4 Leaf – 550kg each
- 5 Leaf – 675kg each
- 6 Leaf – 750kg each
- 7 Leaf – 850kg each
Usually, it is common practice to load share using 2 x 40mm Square axles on a multi-axle trailer. Wrong.
Slipper leaf springs do not load share; they do not transfer load across the entire axle configuration.
For example, each wheel in the above case has a load of 2,000kg (four tyres) or 500kg per wheel.
When the wheel is lifted OFF the ground, it is carrying zero kg
The tyre on the ground load is 1,000kg, while the other two wheels have 1,000 kg of the remaining load.
The axle with wheels on the ground is carrying 1,500kg.
Although the trailer slipper springs are an excellent low-budget solution, consider shackle or rocker roller springs if your budget allows.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | 93 × 15 × 10 cm |
| Spring Leaf # | 3 Leaf, 4 Leaf, 5 Leaf, 6 Leaf, 7 Leaf |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.









Reviews