DeeMaxx 13″ Disc Calipers suit American boat trailers
DeeMaxx 13″ Disc Calipers 3150-3600 KG per tandem trailer. Maximum rating is 1800 per axle. Read about Bedding-in Brake Pads.
Bedding-in Brake Pads
When new brake pads are installed, they should be “bedded-in”. Bedding-in brake pads is a process of breaking them in before severe use, similar to the way an engine or set of gears must be broken in.To perform the “break-in”, follow the steps listed below:
Step 1: Make 10 stops from 30 mph (50 kph) down to about 10 mph (15 kph) using moderate braking pressure and allowing approximately 30 seconds between stops for cooling. Do not drag your pads during these stops. After the 10th stop, allow 15 minutes for your braking system to cool down.
Step 2: Make 5 consecutive stops from 50 mph (80 kph) down to 10 mph (15 kph). After the 5th stop, allow your braking system to cool for approximately 30 minutes.
This completes the “break-in” of the pads to the rotor surface. Full seating of new brake pads normally occurs within 1000 miles.
© 2015 DEEMAXX Components