1.6t Dexter (3500lbs)
1.6t Dexter Bearings
1.6t Dexter bearings are rated to 1600kg for all axle diameters. The bearing profile determines axle rating and not the diameter of the axle.
The term axle profile describes the machined part or shinny part of an axle.
Axle machining begins at the thread end and finished on the rear square shoulder.
Fit weld rings up against the shoulder in the case of electric turn axles. Marine turn axles require a different type of weld ring. Contact us for more information.
A 1600kg standard bearing kit comprises
- Outer Bearing – LM44649 – ID 27.00mm – OD 50.29mm
- Inner Bearing – LM68149/111 – ID 35.00mm – OD 59.97
- Seal – ID 44mm OD 65.22mm
- Dust Cap 62.5mm
The ATM (Aggregate Trailer Mass) of a trailer is determined by
- Spring Rating
- Axle Rating
- Bearing Rating
Where the lowest rating of any of the above components signifies the trailer ATM.
How to calculate trailer ATM
- Weight of the bare trailer
- Weight of the payload
- Jockey Wheel Weight
Changing the lowest common denominator above changes the trailer ATM.
Showing all 2 results