39mm Round Galvanised Lazy Axle

$239.00

Couplemate accepts PayPal, Visa and Mastercard.

39mm Round Galvanised Lazy Axle

39mm round galvanised lazy or unbraked axle has a maximum capacity of 750kg. Axles over 750kg require brakes.

Tandem axles under 2,000kg require brakes on one axle. Tandem trailers over 2t require electric brakes on all axles. In the case of braking requirements for boat trailers over 2t, electrically activated hydraulic brakes are acceptable.
Australian Made

Axles and hubs are Australian-made by Couplemate and Galvanised in Brisbane; as a result, you are purchasing the best equipment money can buy.

The Galvanised Unbraked Axle kit comprises:

Available Stud Patterns

  • Ford – LM bearings
  • HT Holden – LM bearings
  • HQ Holden – LM bearings

Purchase larger galvanised unbraked axles

Calculating The Correct Axle Measurements

  1. Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
  2. Add 50 mm to the offset. Alternatively, choose your distance between the rubber and the chassis.
  3. Multiply by 2 for both sides. Add your chassis width to the above number.

Still unsure of what measurements to take? Check out this handy guide below:

[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face-to-hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres

How To Measure An Axle

Identifying Bearing Combinations

You will also need to identify your bearing combination, which can be done by pulling off a hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.

Where to identify bearing number. Look for the laser engraved number on the bearing.

 

Additional information

Weight30 kg
Dimensions240 × 50 × 50 cm
Stud Patternss

Ford (5 x 114.30mm), Holden HT (5 x 107.95mm), Holden HQ (5 x 120.65mm)

Face to face Length

1450mm – 57-inch, 1475mm – 58-inch, 1500mm – 59-inch, 1525mm – 60-inch, 1550mm – 61-inch, 1575mm – 62-inch, 1600mm – 63-inch, 1625mm – 64-inch, 1650mm – 65-inch, 1675mm – 66-inch, 1700mm – 67-inch, 1725mm – 68-inch, 1750mm – 69-inch, 1775mm – 70-inch, 1800mm – 71-inch, 1825mm – 72-inch, 1850mm – 73-inch, 1875mm – 74-inch, 1900mm – 75-inch, 1925mm – 76-inch, 1950mm – 77-inch, 1975mm – 78-inch, 2000mm – 79-inch, 2025mm – 80-inch, 2050mm – 81-inch, 2075mm – 82-inch, 2100mm – 83-inch, 2125mm – 84-inch, 2150mm – 85-inch

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “39mm Round Galvanised Lazy Axle”

    Your email address will not be published. Required fields are marked *