Lithium Battery Charger Australian Made

Lithium Battery Charger Australian Made

$195.00$460.00 inc GST

Clear
SKU: N/A Category: Tags: , , , , ,
Couplemate accepts PayPal, Visa and Mastercard.

Lithium Battery Charger

Lithium Battery Charger by BMPRO is a great choice to service your car, caravan, camper trailer, bike, boat or as a spare battery.

Importantly the 15A and 25A lithium battery chargers by BMPRO are made in Australia and escape the increasing stock shortages of imported chargers.

made in australiaSmart 12v range of smart battery chargers incorporating stage charging range from 7.5 Amp to 25 Amp. Compatible with all types of lead-acid and lithium (LiFePO4) batteries.

Charging and maintaining the lithium battery is made easy with these 15A and 25A chargers.

What is a Smart Lithium-Ion Battery Charger

A smart Lithium-Ion battery charger switches the mode of power supply and has the ability to communicate with a smart battery pack's battery management system (BMS) in order to control and monitor the charging process.

In other words, a smart charger provides an increasing level of initial trickle charge to the battery and then increases the trickly until the battery is fully charged.

How is fully charged determined?

  • A lead-acid battery is fully charged when the voltage reaches 12v or a predetermined level set by the factory.
  • A smart lithium-ion charger is fully charged when it reaches the battery's maximum holding capacity. (100A, 200A, or whatever the predetermined battery capacity has been set by the factory)

Importantly, the lead-acid battery is charged to a voltage whereas a lithium battery is charged to its holding capacity.

Lead Acid Batteries

Standard old lead-acid battery chargers are not suitable for (LiFePO4) batteries.

A vehicles car battery charger will stop charging when the desired voltage is reached. (LiFePO4); batteries stop charging when maximum battery capacity is reached.

As a result, lead-acid chargers will stop charging (LiFePO4) batteries before an Ion full charge is transferred to the battery.

Couplemate supports Australian owned companies like BMPRO that employ Australian workers.

Note: BMPRO commenced testing (LiFePO4) batteries and are continuing to test. To date, charging and discharging has completed a huge 3000 cycles. The current re-charge capacity is still 90% of full capacity.

(LiFePO4) batteries can be mounted in any position because they contain no fluid. Further, lithium batteries enjoy longer battery life extensively.

Lithium Battery Charger Range

  • 7.5 AMP will take approx 13.3 hours to charge a 100A Battery.
  • 15 AMP will take approx 6.66 hours to charge a 100A Battery.
  • 25 AMP will take approx 4 hours to charge a 100A Battery.

The correct size of your charger depends on the total capacity of your battery and the number of ampere-hours it takes to charge.

BMPRO have produced this great article on what size charger do I choose

For example, a 120 ah battery will take 4 Ah Charger 120A/4=30 hours to charge. The same battery will take approximately 5 hours to charge using a 25Amp charger.

There is also the solar re-charging component to consider,

More great diagnostic videos from BMPRO are here.

v


7.5 Amp Specifications

Output variable up to 7.5 Amps
Input 240V, 50Hz
Size 10-240 Ah - AGM, Gel, Calcium, or Wet
Size 10-80Ah - Lithium (12.8V LiFePO4)
Battery Chemistry AGM, Gel, Calcium or Wet, Lithium LiFePO4
Charger Type Ten-stage – micro digital processor
Power Supply Mode 12V

Key Features

  • Multi-stage charger
  • Ability to charge multiple battery chemistries. For example, lead-acid batteries, AGM batteries, lithium.
  • LCD shows charge progress
  • Overload and reverse connection protection
  • Capable of charging battery sizes 10-240Ah, except Lithium.
  • Durable, dust- and water-proof casing
  • Large clamps for easy battery connection
  • Ring terminals to mount the charger on the battery

Downloads

Product Manual
Datasheet


15 Amp Specifications

Output 5/10/15 Amps
Input 240V, 50Hz
Size 50-500 Ah
Battery Type Lead Acid, LiFePO4
Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4
Charger Type Multi-stage
Power Supply Mode 13.6 V (10 Amp max)

Key Features

  • Made in Australia
  • 7 STAGE – Micro Digital Processor
  • Suitable for charging Lead Acid, AGM, Gel, Calcium
  • Includes LITHIUM (LiFePO4) charging profile
  • Adjustable Amp output
  • Suits batteries 50-500Ah
  • Rugged casing
  • Power Supply Mode

Downloads

Product Manual
Datasheet


25 Amp Specifications

Output 5/15/25 Amps
Input 240V, 50Hz
Size 80 – 800 Ah
Battery Type Lead Acid, LiFePO4
Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4
Charger Type Multi-stage
Power Supply Mode 13.6V (20 Amp max)

Key Feature

  • Made in Australia
  • 7 STAGE – Micro Digital Processor
  • Suitable for charging Lead Acid, AGM, Gel, Calcium
  • Includes LITHIUM (LiFeP04) charging profile
  • Adjustable AMP output
  • Suits batteries 80-800Ah
  • Rugged casing
  • Power Supply Mode

Downloads

Product Manual
Datasheet

Purchase battery chargers here:

BMPRO products are available from Couplemate in Wynnum, Queensland. Please contact us before visiting to ensure we have sufficient stock.

Lithium Battery Charger BMPRO

Additional information

Weight N/A
Dimensions N/A
Charger Rating

, , ,

Reviews

Be the first to review “Lithium Battery Charger Australian Made”