2t – 3t Caravan Seal 64607

$14.66 inc GST

or 4 fortnightly payments of $3.67 with Afterpay More info

SKU: 64607 Category:

Description

2t Caravan Bearing Seal for hubs requires care during insertion. Seals have a small spring inserted under the lip of the seal.

When replacing or re-packing bearings, be sure to replace the seal. In most cases, seals are damaged once removed.

To summarise the video, apply grease to the seal journal before insertion. The inner rubber lip of the seal must be first lubricated to prevent premature wear.

Specifications

  • OD 89.96mm, ID 60.3mm

2t Bearing Seal

2t Landcruiser Metal Bearing Seal for hubs requires care during insertion into the hub. On some seals, there is a small spring inserted under the lip of the seal.

Note: Exercise care not to dislodge this spring from under the lip.

Bearings are often destroyed by its spring when it inadvertently becomes dislodged.

Careful smear a small amount of grease on the axle profile before inserting the hub over the axle.

Seals with rubber outer coverings are more difficult to insert into the hub. As a result, we recommend always to use seals with an outer metal ring.

Purchase other seals here

Finally, find Al-ko 2t caravan bearing seal information here.

2t Caravan Bearing Seal suit Al-ko 12 inch Drums, Disc Rotors

Couplemate Trailer Parts sells only the best quality 2t – 3t Caravan Seal 64607 and caravan spare parts throughout Australia.

Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon December 1, 2019. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.

Additional information

Weight 0.1 kg
Dimensions 12 × 12 × 2 cm

Reviews

There are no reviews yet.

Be the first to review “2t – 3t Caravan Seal 64607”