Ford Slimline Marine

Ford Slimline Marine

Ford slimline marine bearings fit 45mm round axles, 45mm and 50mm square axles.

The Inner diameter of the bearing races is 35mm for the winner bearing and 22mm for the outer bearing.

• Inner ID 35.00mm, OD 59.10mm (68149)
• Outer ID 22.00mm, OD 45.20mm (12749)
• Seal ID 43.9mm, OD 59.10mm (492015)
• Grease Cap 45.20mm (CM497)

1450kg is the maximum rating for parallel bearings. Black grease is an indicator to change the bearings.

Bearing wear produces carbon black from worn bearing races.

When using marine seals it is essential that grease be applied liberally around the 2 seal lips. These lips will burn and create heat if assembled without grease.

Couplemate carries a full rating of dust caps, rubber seals for Dexter, Simplicity and spare parts for all Australian bearing kits.