Holden LM

Holden LM or standard bearings fit 39mm round axles and 40mm square axles.

LM bearings have the same outside diameter as Ford Bearings. However, the Inner Diameter of the bearing races is 19mm and 31.75mm.

Standard bearings are rated at a maximum of 750kg. Further, it is important when using 15 or 16-inch wheels, to derate these bearings to 600kg.

When using marine seals, the grease must be applied liberally around the 2 seal lips. These lips will burn and create heat if assembled without grease.

LM Holden Standard

• Inner ID 31.75mm, OD 59.10mm (67048)
• Outer ID 19.05mm, OD 45.20mm (11949)
• Bearing Seal ID 37.5mm, OD 59.10mm (491015)
• Grease Cap 45.20mm (CM497)

Couplemate carries a full rating of dust caps, rubber seals for Dexter,

Simplicity and spare parts for all Australian bearing kits.