10-inch HT Galvanised Disc Rotor
$95.75
Shipping
10-inch HT Galvanised Disc Rotor
10-inch HT Galvanised Disc Rotor brakes boat trailers up to 1450kg. Galvanised disk rotors are manufactured in Australia by Couplemate.
Couplemate is the only manufacturer of GAlvanised Disc Rotors in Australia. (20th April 2024)
High-grade steel is the foundation for building this superior disc rotor.
This disc rotor sets the industry standard for disc-braked axles and is the most popular rotor in our axle builds.
Disc stud pattern
- HT 4.25″ P.C.D.
Galvanised disc rotors suit standard bearings on 39mm Round Axles to 40mm Square axles or SL bearings for 45mm Round Axles and larger.
Effective Braking for Disc Rotors
When our engineers designed this galvanised rotor, we had the choice of leaving the coating on the disc face or removing it.
Removing the coating opened up opportunities for unsightly rusting.
However, it was found that the machine disc face would exhibit better braking capabilities than the coated face. Disc pads perform best on machined surfaces rather than coated surfaces like dacromat, zinc, or galvanised surfaces.
Eventually, dacroment, galvanised and zinc finishes are removed by disc pads during braking over time.
Trailer Bearing Kit required but not included
- Inner Bearing ID 35.00mm, OD 59.10mm
- Outer Bearing ID 22.00mm, OD 45.20mm
- Seal ID 43.9mm, OD 59.10mm
- Dust Cap 45.20mm
A larger braked disc rotor is available for 1600kg and 2250kg ratings and suits 5-stud and 6-stud Landcruiser hubs only.
Compatible with the following equipment:
- Mechanical Caliper Anchor Plate
- Hydraulic Caliper Anchor Plate
- 10-inch Ford Galvanised Disc Rotor
- 10-inch HQ Galvanised Disc Rotor
- Commodore 10-inch Galvanised Disc Rotor
- Galvanised Multi-Fit Tyres for Boat Trailers
- Al-ko Mechanical Disc Caliper – Forward or Center
- Al-ko Hydraulic Disc Caliper
- Stainless Hydraulic Disc Caliper Al-ko
- 2t Landcruiser Disc Rotor – ElectroGal
Additional information
| Weight | 9 kg |
|---|---|
| Dimensions | 10 × 30 × 30 cm |
| Coating | Galvanised |
| Bolt Pattern (PCD) | |
| Stud Thread | 7/16" UNF – 490200 |
| NSK Bearing # | 11949/10, 12749/10, 67048/10, 68149/10 |
| Bearing Profile | Slimline (SL), Light-Medium (LM) |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Related products
-
60mm x 16mm Polyurethane Spring Bush
$4.00 Add to cart -
Galvanised Spare Wheel Carrier Rescue Kit
$92.40 – $160.30 Options This product has multiple variants. The options may be chosen on the product page -
4 Stud Lazy Trailer Hub
$25.60 – $71.15 Options This product has multiple variants. The options may be chosen on the product page -
Holden Swing Away Hub
$82.50 Add to cart
Reviews