3/8 UNF Hydraulic Hose Fittings – Brass


Frequently Bought Together

3/8-inch Copper Washer

Couplemate accepts PayPal, Visa and Mastercard.

3/8 UNF Hydraulic Hose Fittings to suit Marine brake trailers.

3/8 UNF Hydraulic Hose Fittings suit.

Brass adaptor nuts seal hydraulic lines into components like master cylinders and hydraulic disc brakes.

When connecting dissimilar metals, use copper washers. For example, when combining a brass adaptor with a Dacromet or stainless caliper.

Range of Hydraulic Hose Connectors

If you find your disc brakes or hydraulic cylinder leaking, you have likely screwed the 3/8 inch nut on your hydraulic lines directly into a component that requires an adaptor nut to complete termination.

Your hydraulic line connector is like to require an olive flange.

If you have not installed an olive flange, your connection will leak.

Calipers do not have olive flanges; therefore, you need an adaptor nut.

Use Teflon tape used on all fittings.

Yes, brass on brass connections should not leak, but it is better to be safe than sorry.

If you are in doubt, contact us via our email address.

Finally, brass is not a suitable metal for bonding; hence the use of Teflon tape is recommended,

Additional information

Weight0.1 kg
Dimensions2 × 2 × 2 cm
Brass Hydraulic Fittings

3/8 UNF Joiner, 3/8 UNF Short Tube Nut, 3/8 UNF Long Tube Nut, 3/8 Adaptor M/F, 3/8 UNF M/F American Elbow, 3/8 UNF M/F Australian Elbow, 3/8 UNF x 3 Way Block, 3/8 UNF x 4 Way Block, 3/8 Copper Washer


    Be the first to review “3/8 UNF Hydraulic Hose Fittings – Brass”

    Your email address will not be published. Required fields are marked *