Jockey Wheel Clamp kit to suit standard | heavy duty | swivel applications
Jockey Wheel clamp kits to suit 50mm | 75mm | 100mm | 125mm and 150mm drawbars. Suits all bolt on jockey wheels with 48mm OD outer.
Kits are available to improve the tension between the jockey wheel and the trailer. Clamps are plated in zinc or galvanised .
The wheel clamp is located near the front of the trailer, allows the jockey wheel to be removed, also allows the jockey wheel height to be easily adjusted.
Clamped Jockey wheels can carry weights up to 500kg as a static load. (not moving)
- Standard Clamp
- Twin clamp
- Heavy duty double clamp
- Al-ko swivel | U bolt clamp.
- Manutec double clamp galvanised kit.
Standard Clamp Kit
Comprised a 48mm ID Jockey Wheel clamp that is suitable for bolt on or weld onto a chassis rail.
Also fits standard and medium jack and jockey wheel stands.
Heavy Duty Clamp
Weld on Clamp to suit Medium and Heavy Duty Range of Jockey Wheels and Stands.
Hole centres are 100mm. Note: Not suitable for 100mm u bolts.
The clamp handle suits all 48mm ID clamps.
Al-ko Swivel U bolt clamp
uBolt swivel clamp by Al-ko is a very useful tool if you wish to swivel your jockey wheel. The added advantage is removing the jockey wheel for storage when required.
Turns all Al-ko and all Manutec 48mm OD Jockey Wheels into swivel jockey wheels.
Easy to install. You will require a spanner and u-bolts to suit your drawbar.
Suit drawbar sizes
- 50mm wide x 50mm high
- 50mm wide x 75mm high
- 75mm wide x 75mm high
- 50mm wide x 100mm high
- 75mm wide x 100mm high
- 100mm wide x 100mm high
Manutec Double Galvanised Clamp Kit
- Double Clamp Galv. to suit std 48mm tube BOLT ON KIT.
- Double Clamp gives Extra Support on Standard and Medium Jockey Wheels and Stands.
- Ideal for use on the Extra Height Jockey Wheels using standard 48mm O.D. Outer Tube.
- Bolt on Kit to suit Draw Bar 50mm x 100mm / 125mm – 150mm
U bolts cannot be used to install this clamp. However, a good read on u bolt and how to prevent disaster can be read here.