Shock Absorber Bottom Bracket

$12.40 inc GST

SKU: N/A Category:


Shock Absorber Bottom Bracket

Shock absorber bottom bracket may require longer u-bolts. Note: Check your u-bolts are 10mm longer to accept this bracket.
shock absorber diagram
Mounting brackets are available for left and right sides.

Install shock absorbers at 15 degrees off the vertical and 10 kilometres of travelling, for the best performance.

Brackets can be turned upside down to provide extra length or shorten the travel in your shock absorber.

Further, one slotted hole accommodates 45mm or 50mm springs.

The mounting brackets are chiefly manufactured to fit 60mm spring packs.


Firstly, measure the length of your bolt below the nut. If you have an extra 10mm thread then longer u-bolts are not required.

Purchase additional, longer u-bolts here.

Secondly, tightened up your fishplate u-bolts on the diagonal and re-check the tightness after 200 kilometres.

Couplemate Trailer Parts sells only the best quality Shock Absorber Bottom Bracket and caravan spare parts throughout Australia.

Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon November 26, 2017. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.

Additional information

Weight1 kg
Dimensions15 × 8 × 5 cm
Select Left or Right



There are no reviews yet.

Be the first to review “Shock Absorber Bottom Bracket”