Upper Shock Absorber Bracket

Description

Upper Shock Absorber Bracket

The upper shock absorber bracket is U-shaped. It can be welded or bolted to the chassis rail.

Ideally, mount brackets are mounted to follow the camber compression as the load is applied and removed.

Installation

• Measure the fully open length and the fully closed length of the shocky.
• Set the length to half of the fully open or closed length. This is the correct length to allow compression and rebound.
• Install the bolt into the bottom mount.
• Slide the top mount along the chassis rail until it is located in the middle of the chassis and attach to the chassis with a bolt or, alternatively, weld.

This mount is 50mm wide with a 12mm hole.

• Bottom mounts can be found here.
• Shock Absorbers

Couplemate Trailer Parts sells only the best quality Upper Shock Absorber Bracket and caravan spare parts throughout Australia.

Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon November 26, 2017. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.