Couplemate Trailer Parts.
Couplemate Trailer Parts.

Horse float Tailgate Ramp Spring – 80kg Left

Part No: 1007-L Category:
Part No: 1007-L Category:

$245.00

Frequently Bought Together

Heavy-Duty Spring Holder - Tail Gate (CM288)

Tailgate bar uses K1045 axle steel for expert strength.
✓ Easy to install by welding the the sturdy plate steel onto chassis.
Suits tailgate coil springs up to 19mm in diameter.

Designed and manufactured by Couplemate™ Australia.

Shipping

Select delivery location

Couplemate accepts PayPal, Visa and Mastercard.

80kg Left Loader Spring for Horse float Tailgates and Ramps

A tailgate, horse float, and ramp loader spring is a type of torsion spring used to assist in the opening and closing of tailgates, horse floats, and ramp loaders. It is typically made of high-quality steel and is designed to withstand heavy loads.

Horse float tailgate and ramp loader springs are available in various sizes to suit different weight capacities. The most common sizes range from 40kg to 100kg, but larger springs are also available for heavier applications.

When choosing a tailgate, horse float, or ramp loader spring, it is essential to select the correct size for the weight of the tailgate, horse float, or ramp loader it will use. It is also crucial to ensure the spring is installed correctly for optimal performance and safety.

If you know a manufacturer of parts that might suit Couplemate, we would love to hear from you and continue our support for Aussie families. Contact Couplemate Trailer Parts

Mistakes

It is a mistake to guess the weight of your tailgate.Spring Holder - Horse Float Tail Gate

The tailgate will only come down halfway if the spring is too heavy. This indicates you have chosen a spring too heavy for your fate.

Torsion Product Specifications

14-16mm Models: (Made in Australia)

  • Small tail: 150mm from the centre of the coil
  • Long-tail: 705mm from the centre of the coil
  • Coil O.D.: 80mm
  • Coil I.D.: 55mm

17-19mm Models: (Imported Product)

  • Small tail: 160mm from the centre of the coil
  • Long-tail: 525mm from the centre of the coil
  • Coil O.D.: 87mm
  • Coil I.D.: 45mm

Tailgate spring holders are laser-cut and machined in Brisbane.

How to Tell: Left or Right

The Tailgate Ramp Loader springs come in both left-hand and right-hand options.

To tell which spring you require, the smaller tail end should be pointed away, and whatever side the longer spring sits on is the side it’s suitable for.

For example, if the short tail is pointed away from your body, and the long tail is on the right, you require a right tailgate ramp loader spring.

Selecting Tailgate Ramp Spring Size

Often, folks pick the most significant size to ensure the spring is heavy enough for the required lift. Once installed, with an oversized heavier spring, the horse float tailgate swings up so violently that it slams into the trailer with enough force to create damage.

It is critical to have an ideal weight when lifting and lowering tailgates.

Buying the correct ramp spring is simple if you follow a few easy steps. (You will need a scale.)

  1. Lower the ramp onto the scale (use a small piece of wood to prevent damage to the scale). You now have the ramp’s weight measurement.
  2. Select a spring size of 10kg that is more substantial than the scale indication.
  3. Once installed, the load on your ramp will be 10kg at the point where it touches the ground.

Car trailers and low loaders use drop or overlay axles. This type of axle lowers the centre of gravity, lowering the trailer.

Tailgate, horse float, and ramp loader springs are essential safety features. Choosing and installing the correct spring can help ensure your and others’ safety when using your tailgate, horse float, or ramp loader.

Below are links to a variety of other size springs

Additional information

Weight6 kg
Dimensions80 × 30 × 20 cm

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “Horse float Tailgate Ramp Spring – 80kg Left”

    Your email address will not be published. Required fields are marked *

    Custom ICS Quote

    Couplemate™ Off-Road Independent Coil Suspension.
    couplemate trailer parts australian made

    Australian Made

    We supply Australian Made trailer and caravan parts.

    Installation Help

    Check out our FAQs and installation guides.

    Welcome

    Login and shop for our trailer parts to enjoy a faster checkout experience.

    High-Quality Trailer Parts

    Couplemate™ Core Range

    Couplemate Trailer Parts.

    About Us

    Contact Info

    Trade & Wholesale

    Australian Made

    Australian Made

    FAQ