3/8-inch Hydraulic Brass Adaptor
$5.00
Shipping
3/8-inch Hydraulic Caliper Brass Adaptor to suit Marine Brake Trailers.
3/8-inch hydraulic caliper brass adaptor to suit a variety of Australian marine brake calipers. A copper washer is required to seal adaptors from leakage.
- Hydraulic master cylinder
- Al-ko Disc hydraulic calipers
- Trojan Disc Calipers
- Hydraulic parts that require an olive seat
Brass adaptor nuts seal hydraulic lines into components like master cylinders and hydraulic disc brakes.
When connecting dissimilar metals, use copper washers. For example, when combining a brass adaptor with a Dacromet or stainless caliper.
Range of Hydraulic Hose Connectors
- American Caliper tapered elbow – Brass
- 3/8-inch Hydraulic Brass Elbow
- 3-Way Brass Block – brass
- 4-Way Brass block – brass
- Copper Washer
If you find your disc brakes or hydraulic cylinder leaking, you have likely screwed the 3/8 inch nut on your hydraulic lines directly into a component that requires an adaptor nut to complete termination.
Your hydraulic line connector is like to require an olive flange.
If you have not installed an olive flange, your connection will leak.
Calipers do not have olive flanges; therefore, you need an adaptor nut.
Use Teflon tape used on all fittings.
Yes, brass on brass connections should not leak, but it is better to be safe than sorry.
If you are in doubt, contact us via our email address.
Finally, brass is not a suitable metal for bonding; hence the use of Teflon tape is recommended,
Additional information
| Weight | 0.05 kg |
|---|---|
| Dimensions | 2 × 2 × 2 cm |
| Brake Type | Hydraulic |
| Fitting Type | Adaptor |
| Materials | Brass |
| Stud Thread | 3/8" UNF |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Ivan –
This 3/8 ” brass adaptor is crap,soonest I try to tighhten up this fitting snapped ,perhaps it should be made from stainless steel not a brass.