75mm Park Brake Handle for Boat Trailer – 614046


4 in stock

4 in stock

Frequently Bought Together

Trailer Brake Cable Kit

Couplemate accepts PayPal, Visa and Mastercard.

75mm Park Brake Handle for Boat Trailers

The 75mm Park Brake handle or lever for a boat trailer to suit a 75mm wide chassis rail.

This park brake lever is also an emergency parking brake.

It suits drawbars with the following widths.

The galvanised marine park brake lever or hand brake is positioned over a drawbar to engage a cable connecting the brake callipers.

Purchase hydraulic handbrake handles here.

The override coupling activates the parking brake during braking, pulling the brake callipers.

  • Position the drawbar handle against the override bumper on the back of the brake assembly.
  • Mark the hole position to create a pin location and drill through the middle of your drawbar. Affix the marine brake handle with a suitable bolt.
  • Locate the pivot bolt in the middle of the chassis rail
  • Connect the park brake cable from the disc brake on the bottom arm to the galvanised marine brake handle.

The CM791, 8-meter cable kit is the standard length of a galvanised park brake. Purchase the equipment here.

Finally, override couplings that suit this parking brake handle lever are 2t Mechanical Override Coupling AL-KO.

Additional information

Weight3 kg
Dimensions40 × 30 × 12 cm


    Be the first to review “75mm Park Brake Handle for Boat Trailer – 614046”

    Your email address will not be published. Required fields are marked *