Electric Brake Cable Kit or Override Brake Cable Kit
Electric brake cable kit is suitable to be installed electric brake park brake levers, mechanical override drum b and mechanical override disc b calipers.
Please note: Cable length is 8mtr. We do not stock longer lengths.
Cable Kit supplied with 8 meters of cable, two-wire rope grips, two cable pulleys and one cable brake adjuster.
- Compete Cable Kit – All Zinc Parts
- Cable Pulley Zinc
- Cable Adjuster
- Wire Rope Grip
- Cable Pulley 316 Stainless (plastic wheel) – not incl in kit
Notes: Stainless pulley wheel has a 20mm plastic wheel and is 45mm long. We recommend using a stainless saddle, fix it into the trailer chassis rail via a stainless screw.
Note: The cable brake adjuster is for removing the slack from the cable. The brake adjuster is inside the electric backing plate or on the back of the caliper arm. Do not use the cable brake adjuster to adjust your brakes.
Disc calipers have an adjusting bolt on the back of the caliper arm.
Adjust this nut first by adjusting until pads are hard against the rotor and the rotor is unmovable then back the nut off 1/2 turn.
Adjust cable until taunt using the cable adjuster. Do not overtighten.
Finally, pulleys are useful where cable changes the angle, example centre pull calipers.