Grub Screw Handle - Alko

Grub Screw Jockey Wheel Handle from AL-KO

The AL-KO grub screw handle once tightened locates into a drilled hole on the jockey wheel worm drive.

The worm drive is hardened steel. The AL-KO handle rotates the worm drive to raise or lower the jockey wheel.

Another option is the roll pin model that fits worm drives with a smaller hole. The old roll pin can be pushed out with a punch or a nail with the point ground to a flat.

AL-KO jockey wheel handle models have a larger diameter roll pin than the comparable le Manutec model.

Nut and bolt Handle is used on jockey wheels that have a hole through the worn drive.

Showing the single result

  • Manutec jockey wheel grub screw handle

    Replacement Jockey Wheel Handles