Roll Pin Alko

Roll Pin Jockey Wheel Handle from AL-KO

The roll pin from Al-ko fits worm drives with a larger hole. The old pin can be pushed out with a punch or a nail with the point ground to a flat.

AL-KO models have a larger diameter pins than the comparable le Manutec model.

Nut and bolt Handle is used on jockey wheels that have a hole through the worn drive.

The grub screw handle is another option but the worm drive has no hole through it. Instead, the top drive of the drive has been counter-sunk to accept the head of a grub screw.

AL-KO and Manutec grub screw models are interchangeable.

No products were found matching your selection.