Showing all 1 result
1200 psi Hydrastar® Brake Actuator Generation 7 suits boat trailers under 3.2t.
The Law requires trailers over 2t to install a breakaway kit on your trailer or caravan.
The Carlisle hydrastar® actuator requires a 12 volt DC Tekonsha iPrimus or P2 hard-wired controller. Redarc brands are also suitable.
Click the image and be taken to the Brake Controller page.
The big worry with this product is the availability of a warranty, is this product shipped from America and how good is it?
Couplemate has good stocks of this product and ships from Brisbane.
Carlisle offers a 2-year warranty on all HydraStar 1200 psi units against faulty workmanship. Warranty issues are handled here in Australia.
- Application: single, or tandem-axle trailers with disc brakes
- Maximum output pressure: 1,200 psi
- Power: 12V DC
- Hydraulic port size: 3/16″
- Dimensions: 11-3/4″ long x 3″ wide x 7-3/8″ tall
- Wire configuration:
- Black: 12-volt power
- Blue: brake controller
- Yellow: breakaway
- White: ground
- 2-Year limited warranty
Trailer braking is the most critical function of towing. Therefore, electric braking provides the ultimate in control and safety
HydraStar® has the quickest response time and the lowest current draw of any brake actuator on the market.
Note: Proportional controllers do not supply 100% of the voltage when the vehicle is not moving. Your car must be driving for the Hydrastar to work correctly.
To test the braking system, pull the pin on the breakaway kit to assist you to bleed the system of hydraulic oil.
Hydrastar® equipment is available in
- 1200 psi is suitable for boat trailers up to 3.2 Tonne.
- Trailers over 3.2t require the 1600 psi model.
Learn how to eliminate vibration fatigue in boats and trailers.
Furthermore, the CM702 breakaway kit, not supplied but required if your boat and trailer is over 2t.
Please leave a comment if you like our prices and prices. We try our best to get your purchase into the transport systems like Australia Post and Toll Ipec as quickly as possible.
Purchase replacement parts
Finally, stainless braided hydraulic hose is a good investment to use to connect your Hydrastar to the hydraulic calipers.