Price
$308.00 – $365.48 Inc.GST
After ordering, we require the following information because we liked it the first time.
- Wheel Backspace
- Outside to Outside Chassis width
- Pick up is recommended, however, we can use your transport or give you a price for our carrier.
Shipping
Square Overlay Axle | Slimline | Parallel | 2t | Profile
Square overlay axle for horse floats, boat trailers, car trailers or any trailer where you want a low centre of gravity.
45mm Axle Specifications
- 45mm Solid Beam
- Stub Axle to suit SL or parallel bearings
- The overlay portion is 50mm
- Weld Rings to suit 10″ Electric Brakes
50mm Axle Specifications
- 50mm Solid Beam
- Stub Axle to suit 2t bearings
- The overlay portion is 50mm
- Weld Rings to suit 12″ Electric Brakes
After ordering, we require the following information because we liked it the first time.
- Wheel Backspace
- Outside to Outside Chassis width
- Pickup is recommended; however, we can use your transport or give you a price for our carrier.
All our Overlay Axle SL are built identically with zero variation in camber.
10″ or 12″ Electric Weld rings are included to make it easy to unbolt and then reassemble your existing brake setup.
2.25t x 50mm Square Overlay Axle – Galvanised
Other available hanger kits
- 45mm Slipper Single Axle.
- 45mm slipper Tandem.
- 45mm Eye to Eye – Single.
- 45mm Eye to Eye – Tandem.
- 60mm Eye to Eye – Single.
- 60mm Eye to Eye – Tandem.
How to calculate the face-to-face measurement.
- Measure the offset wheel. The wheel offset is the distance between the hub’s inside and the rubber’s outside.
- Add 50 mm to the offset. Alternatively, choose your distance between the rubber and the chassis.
- Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:
[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face-to-hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres
Identifying Bearing Combinations
You will also need to identify your bearing combination which can be done by pulling off a hub and bearings, and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing number.
Additional information
Weight | 50 kg |
---|---|
Dimensions | 240 × 60 × 60 cm |
Bearing Profile | |
Beam Size | 45mm Square |
Axle Style | Overlay |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews