10mm x 2.5t Safety Chain and Holder Kit

Part No: CM546 Category: Tags: ,

$57.50

39 in stock

39 in stock

Couplemate accepts PayPal, Visa and Mastercard.

10mm x 2.5t Safety Chain and Holder Kit

Safety Chain, Hammerlock and Holder Kit include:

  • 10mm option: one set to suit trailers up to 2.5t.
  • 13mm option: two sets to suit trailers over 2.5t.

Galvanised chains and shackles are illegal on all trailers over 3.5t. Trailers over 2.5t require two safety chains.

It is essential to remember.

  • No chain welding over 2.5t
  • No chain welding below the chassis rails. Weld safety chains horizontally.

Trailers up to 2.5 tonnes ATM must have at least one safety chain complying with AS 4177.4 – 1994 (Trailer and light trailer towing components – Safety chains up to 3.5 tonnes capacity) or as amended from time to time.

This standard allows for steel safety chains by the following

  • up to 1.0 tonne, a chain size of 6.3 mm
  • up to 1.6 tonnes, a chain size of 8 mm
  • from 1.6t to 2.5t, with a chain size of 10 mm

Trailers over 2.5 and up to 3.5 tonnes ATM must have two safety chains complying with AS 4177.4 – 1994 or as amended foccasionally This standard allows for steel safety chains by the following:

• up to 3.5 tonnes, a chain size of 13 mm.

Safety Chain Kits for Caravan and Trailers

  • more than 3.5 tonnes ATM,
  • all medium and heavy category pig trailers with rigid drawbars,
  • any other trailers without breakaway brakes
  • and all fixed and rigid pig trailers with a GTM higher than 2.5 tonnes and fitted with automatic pin-type couplings,

An excellent article on Dee Shackles and Safety Chain

Purchase attachments for Dee Shackles

Finally, Trailer Safety Chain Key Points

  • 10mm Chain Holders can be welded to trailers up to 2.5t
  • Safety Chain must be affixed to holders via a Hammerlock or Cam Lock
  • Dee Shackles are prohibited for use when securing a safety chain to a trailer

Ref: StandardsQueensland – Safety Chain Requirements

Additional information

Weight3 kg
Dimensions15 × 10 × 10 cm

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “10mm x 2.5t Safety Chain and Holder Kit”

    Your email address will not be published. Required fields are marked *