Replacement Spare Wheel Carrier Hub – No Bearings

$50.91$150.70 inc GST

Engineered for Quality

SKU: CM079 Categories: ,


Replacement Spare Wheel Carrier Hub

Replacement Spare Wheel Carrier Hub is a swing away flangeless hub that excludes a bearing kit (no spindle).

Couplemate manufacturers swing away wheel carrier hubs from high-grade Australian steel to produce a quality product in the following bearing profiles:

  • Holden standard LM bearings
  • Ford Slimline Bearings
  • Parallel Bearings
  • 2t Bearings and 3t bearings.

You may be interested to learn that 2t and 3t kits are often used on wind farms to swing our equipment to be lowered and on mining sites for swing-out hoists.

The 4WD swing away spare wheel carrier often needs to be replaced because the weight is too much for the bearings. This results in assembly collapse. If your construction has collapsed, replace it with the non-bearing type carrier.

Caution: 4WD Swing Away Carriers

We recommend using a 45mm Slimline or 45mm Parallel model due to the added load caused by the fulcrum effect on the rear bar.

Unless you carry a very light load, we do not recommend the 39mm Round or 40mm Square models.

4WD Swing Away

LM or Holden Bearings (no spindle)

  • Inner ID 31.75mm, OD 59.10mm
  • Outer ID 19.05mm, OD 45.20mm
  • Seal ID 37.5mm, OD 59.10m
  • Grease Cap 45.20mm

SL or Slimline / Ford Bearing Kit (no spindle).

  • Inner ID 35.00mm, OD 59.10mm
  • Outer ID 22.00mm, OD 45.20mm
  • Seal ID 43.9mm, OD 59.10mm
  • Grease Cap 45.20mm

Parallel Hub only plus Bearing Kit (no spindle).

  • Inner ID 35.00mm, OD 59.10mm
  • Outer ID 35.00mm, OD 59.10mm
  • Seal ID 43.9mm, OD 59.10mm
  • Grease Cap 63.00mm

Installation Note:

Bearing cups have been machined into the hub. If you are replacing the bearings for any reason, do not insert new cups into the hub.

Suits bearing profiles above and includes the bearings above. We made this high quality, heavy-duty replacement hub for a tyre carrier that has become worn or broken.

As the stub axle gets larger in size, the capacity of the loading increases.

Swingaway Hub plus Bearing Kit is suited to many attachments, including 14-inch wheels, spare tyres, jerry can holders and gas holders or even tool trays.

Opinion: I have never been sorry about over-engineering a design. I always recommend over-engineering to add a safety factor of approximately 1.5t expected load.

We can build these swivel hubs up to 3t capacity.

45mm Parallel Stub Axle with Thread Attachment

Couplemate Trailer Parts sells only the best quality Replacement Spare Wheel Carrier Hub – No Bearings and caravan spare parts throughout Australia.

Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon September 7, 2021. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.

Additional information

Weight3 kg
Dimensions10 × 10 × 10 cm
Axle Profile

, , ,


There are no reviews yet.

Be the first to review “Replacement Spare Wheel Carrier Hub – No Bearings”