4WD Swing Away Rear Bolt-On Spare Wheel Carrier - Australian made
4WD swing-away rear bolt-on and thank you for visiting. You are supporting Australian workers like you, who make this product.
In this application, there is no requirement for high-speed bearings. We decided to manufacture a more robust spare wheel carrier that could withstand applied stresses. The clearance between hub and stub is 0.02mm and requires greasing prior to insertion.
Spare Wheel Carrier Sizes
Increases in bearing size result in an increase in load capacity. The thread size is 7/8 inch unf.
The loading rate depends on the length of swing-away you intend to use.
The longer the arm, the more loading on the bearings.
Additional information
Weight | 4.5 kg |
---|---|
Dimensions | 30 × 10 × 10 cm |
You must be logged in to post a review.
Reviews