Trailer Rescue Spare Wheel Kit - Slimline Bearings
The trailer rescue spare wheel kit is galvanised to suit caravans and boat trailers. All spare parts are galvanised, heavy-duty and suit chassis rails 50mm wide.
Wheel Stud patterns available
- 5 Stud Landcruiser
- 5 Stud Ford
- 6 Stud Landcruiser
- 5 Stud Holden HT
- 5 Stud Dexter USA 1.6t
Please note: If your chassis rail is wide than 50mm, let us know so we can include longer u bolts.
We have a big range of Australian-made high-speed spare wheel carriers and trailer rescue kits for caravans and boat trailers.
Made in Australia means more than just the words. Australian made by workers who have studied and completed technical training to produce goods suitable for the worst Australian conditions.
There is a 150mm adjustment on the galvanised spare wheel carrier bracket, so you can get a stylish, neat finish. Just slide the box section up or down inside the bracket to adjust to the trailer wheel's correct height. The gap between the boat and the wheel is 15mm and more room to open the gap if required.
The back view shows how compact the spare wheel holder can fit if you have the correct adjustments.
The 45mm Square Galvanised Axle suits Slimline or Ford bearings.
- Inner ID 35.00mm, OD 59.10mm
- Outer ID 22.0mm, OD 45.20mm
- Bearing Seal ID 37.5mm, OD 59.10mm
- Dust Cap 45.20mm
Trailer parts included in the Trailer Rescue Hub Kit kit is:
- Two galvanised u-bolts plus galvanised nylocks and galvanised washers
- 50mm x 50mm galvanised vertical holder
- 1 x backing plate to suit 75mm and 100mm draw-bars
- 1 x 45mm square galvanised axle plus castellate nut and split pin
- Castellated nut, spring washer, and R clip to retain axle inside 50mm square tube
- Select the stud pattern for your galvanised hub
- SL Bearings
Manufacturing History
November 2016: We decided that since no company was producing lazy or unbraked hubs in Australia that there maybe there is a market.
Our Brisbane factory machines the hub faces and inserts studs the castings in our Brisbane factory. Australian made accreditation, January 2016.
More spare wheel carriers are available below
- HT Holden Trailer Rescue Spare Wheel Kit
- Disc Brake Trailer Rescue Kit
- Parallel Trailer Rescue Hub Kit
- 4WD Spare Wheel Carrier Swing Away Hub
- Spare Wheel Carrier Kit
Trailer Spare Wheel Rescue Kit - Slimline Bearings
Additional information
Weight | 8 kg |
---|---|
Dimensions | 30 × 15 × 10 cm |
Stud Pattern | Ford USA – 1.6t, Ford 5 Stud, HT Holden, Land Cruiser 6S, Land Cruiser 5S |
You must be logged in to post a review.
Reviews