Outback Rebound Off-Road Spring

Outback Rebound Off-Road Camper Spring

The outback rebound off-road leaf springs are renowned for their durability in heavy off-road conditions.

Specifications

• Eye to Eye Rebound Leaf Spring – 841mm long.
• The weight in the description is for two springs.
• 60mm x 7mm
• Steel Bush dimensions 5/8 inch x 7/8inch x 60mm.
• Free Camber 158mm
• Eye to Center Bolt 420mm
• Install spring rear hanger 35mm longer than the length of spring.
• The second leaf in the Outback Spring series wraps around the eye to provide extra support during shock-loading events.

Outback Rebound leaf spring ratings per pair.

• 7 Leaf Outback off-road spring- 1500kg
• 9 Leaf Outback off-road spring- 2000kg
• Ten leaves Outback off-road spring- 2500kg

Spring eye has inserted a steel bush to ensure long wearing in harsh terrains. This steel bush does require periodical greasing.

Tip: Tighten shackle bolts until hangers are tight against the spring. Then back off the nut 1/2 a turn.

Parts for the outback rebound camper spring are at these links below,

• 16mm Greaseable Shackle Bolts.
• 16mm Shackle Bolt kit.
• 60mm Outback Spring Bush
• Outback Hanger Kit (One Side)
• Replacement 60mm Brass spring bushes.
• Replacement front hanger.
• 16mm Heavy Duty ElectroGal U-Bolt Kits
• Caravan Shock Absorbers

Couplemate recommends pre-greasing shackle bolts before insertion into spring bushes.