Last updated on August 8th, 2019 at 02:07 pm
60mm Off-Road Steel Spring Bush suits 60mm outback springs.
60mm off-road steel spring bush is a great replacement where the usage of nylon bushes creates too much wear and you need to go to a heavier bushing system.
This high tensile bush can be difficult to locate and purchase as it is not commonly available. Couplemate currently manufactures this product and as a result, have good stocks of this bush.
This bush is used mostly on off-road outback springs made by Al-ko. When using steel bushes you will need to upgrade to greaseable shackle bolts.
- ID 16mm
- OD 7/8″ or 22mm
- Length 60mm
To install simply place the steel bush over the top of the nylon bush and tap with a hammer until the nylon bush is pushed out of the spring.
60mm steel spring bush must be checked regularly and greased when necessary. It is also good practice to remove the shackle pin and check both the hanger and the pin for wear.
If you are experiencing excessive wear and tear on your springs, check the Al-ko recommended setup instructions for outback springs here.