Last updated on September 24th, 2019 at 03:13 pm
Rocker roller steel bush is a great replacement where the usage has worn the ID or the OD has reduced in size enabling the spring to jump on the roller.
The bush must be 59mm wide with an ID of 16mm,
This bush is used mostly on rocker roller springs made by Al-ko and other manufacturers.
- ID 16mm
- OD 40mm
- Length 59mm
When installed correctly this bush must roll freely between the front and back of the rocker spring eyelet.
Other associated parts are
- 45mm Spring Bushes
- Rocker Roller 60m Bush
- 18mm x 100mm HT Rocker Roller Center Bolt
- 19mm x 75mm HT Rocker Roller Center Bolt