The Couplemate Caravan Reversing Guide (Marriage Saver®) makes hitching up your caravan, boat or camper easier than ever! Reversing cameras are great, but they do not stop accidents as efficiently as this trailer guide.
We support local suppliers and help bring business back to Australian shores. There is strong demand for Australian Made caravan and trailer parts across the market.
The facts are simple; Australian Made goods create employment in Australia.
Traditional trailers, caravans, and campers usually have springs mounted below the axle (often called "overslung" axles). However, some trailers in Australia are supplied with springs on top of the axle by default. For example, if you own a Jayco Off-Road caravan or...
Showing all 7 results
Trailer Spring Suspension or Hanger Kits for Slipper and Shackle Springs. Hangers must be welded a minimum of 25mm from spring when fully extended.
The easiest way to get your spring hangers perfect is to bolt the hanger plates onto your spring.
Measure and tac weld the front spring hanger into position.
Stretch the rear spring hanger, so it measured 25mm longer than your spring.
Tac weld the hanger onto the position.
When fully loaded the outback spring shackle plate should point toward the rear of your trailer at 5 pm (left) and 7 pm (right)
Install spring hangers on a piece of angle iron and install the spring. Secure the angle iron onto the chassis rail with u-bolt clamp kits.
Slide the spring up and down the chassis rail until it is perfectly centred on the trailer chassis.
The facts are simple; Australian Made goods create employment in Australia.
Traditional trailers, caravans, and campers usually have springs mounted below the axle (often called "overslung" axles). However, some trailers in Australia are supplied with springs on top of the axle by default. For example, if you own a Jayco Off-Road caravan or...
Available Monday to Friday, 8am to 5pm.
