Description
Outback Hanger Kit (One Side) | Suit 16mm Greaseable Shackle Bolts
60mm Off-Road steel spring bush. Click image to purchase
Outback hanger kit is used on all Al-ko outback springs and contains the following components
- 16mm Greaseable Shackle kit
- Rear Hanger
- Front hanger
- 1 x 16mm greaseable shackle pin.
Fits five-leaf to 10 leaf Alko outback off-road 60mm wide springs.
Suits 32mm wide shackle plate kits with 16mm greaseable bolts.
Install hangers 35mm longer than the eye to eye measurement of the spring.
The outback rear hanger can also be used to upgrade other 60mm shackle springs especially if your caravan or camper is suffering excess wear from rough or corrugated roads.
Replacement parts are readily available for outback springs. The exception to the rule is rebound unavailable leaf springs.
Click how to install instruction from Alko below.
How to install outback hanger for off-road springs.
How to tighten shackle plates.
- Tighten shackle bolt until home.
- Back off 1/4 turn.
- You need a small space between your shackle plates and spring; otherwise, you will develop an annoying squeak when driving at speed or on corrugated roads.
- This squeak is due to no tolerance between shackle plates and spring.
Purchase greaseable shackle bolt kits here
Couplemate Trailer Parts sells only the best quality Outback Hanger Kit (One Side) and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.
We also ship products to New Zealand via Australia Post Air Express.
© Steve Wotherspoon August 13, 2016. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.
Reviews
There are no reviews yet.