Last updated on September 25th, 2019 at 10:00 am
Outback Hanger Kit (One Side) | Suit 16mm Greaseable Shackle Bolts
Outback Hanger Kit (One Side) Suit 16mm Greaseable Shackle kits. Suits 32mm wide shackle plate kits with 16mm greaseable bolts, 10mm plate steel.
Fits 5 leaf through to 10 leaf Alko outback off-road 60mm wide springs.
Suits 32mm wide shackle plate kits with 16mm greaseable bolts.
Install hangers 35mm longer than the eye to eye measurement of the spring.
The outback rear hanger can also be used to upgrade other 60mm shackle springs especially if your caravan or camper is suffering excess wear from rough or corrugated roads.
Click how to install instruction from Alko below.
How to tighten shackle bolts.
- Tighten shackle bolt until home.
- Back off 1/4 turn.
- You need a small space between your shackle plates and spring otherwise you will develop an annoying squeak.
- This squeak is due to no tolerance between shackle plates and spring.
Greaseable Shackle Bolts can be located by clicking these links.