Pintle Hook Tow Ball Replacement for 50mm Combination Pintle Hitches
Pintle hook tow ball replacement for a 50mm combination pintle hook. Shank diameter can change depending on the type of pintle hook.
Couplemate Trailer Parts manufactures and tests the tow balls listed below.
The pushing RAM is on the left-hand side of the tow ball. The measuring sensor is on the right-hand side of the tow ball.
These tests ensure you are buying a tow ball that satisfies all Australian Safety Requirements.
Measure the diameter of the tow ball thread before buying a replacement.
Note: Not all pintle balls are the same. This model includes a 1/2″ nut to ensure enough thread to lock the tow ball into position.
Available replacement tow ball diameters are:
- 25mm – 52mm Shank – 45mm Thread Length
- 28.4mm – 56mm Shank – 32mm Thread Length – (CM293) Fits CM500 and CM530
- 32mm – 62mm Shank – 43mm Thread Length (fine)
- 32mm – 75mm Shank – 43mm Thread Length (fine)
- Coarse 32mm – 62mm Shank – 48mm Thread Length
Pintle Hitch Testing
Heavy Duty Towball testing at Couplemate
The Australian Standard requires 3.5t tow balls to be tested with a horizontal force of 85kN or approximately 8.5t.
Pintle Hook balls are rated to 3500kg. Higher ratings for 4500kg pintle hooks are not available at this time. However, they may be available at some point in the future.
Also, review combination pintle hook ball protectors to prevent excessive wear and tear.
How to Break a 3.5t Tow Ball
This is an excellent example of what can occur for trucks over 5t using 50mm Pintle Combinations.
Reversing a truck onto the ring coupling is not as easy as it seems.
Trucks crashing ring coupling into the tow ball will cause the tow ball to break.
Reversing into the ball causes shock loading of more than 3.5t and, more likely, 8.5t or more excellent.
Tow balls do not break unless used at loadings over the rating or incur shock loading.
Pintle tow balls fit the pintle hook below
- Pintle Combination to suit 6t Truck
- Combination Hook Incl 3.5t Ball – D-Value 34.08kN
- Combination Hook Receiver Arm
- Pintle Tow Ball Protector
Additional information
Weight | 3 kg |
---|---|
Dimensions | 10 × 5 × 5 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews