40mm Orlandi (Pin/Ring) Coupling
Price
$1,102.50 Inc.GST
Shipping
40mm Orlandi Truck Trailer (Pin/Ring) Coupling
- Hole Pattern 120mm x 55mm
- CRN 37744
- D-Value 30kN
- V-Value 18kN
- S-Load 350kg
- DIN 74054
- M14 – Class 10.9 Bolts
- Torque 230 Nm
Operating Instructions
COUPLING
Before the coupling operation, check that the trailer’s brake is on and that the drawbar eye and the coupling are on the same level.
- Pull the security knob (3) outwards as shown in Figure 2a. (Technical Datalink)
- Turn the security knob clockwise to the end, as shown in Figure 2b, then release it.
- Lift the action lever (4a) as far as it will go, as shown in Figure 2c. The coupling pin is now up.
- Reverse the towing vehicle slowly until the drawbar eye is in the bellmouth. The coupling pin (25) descends, and the security device engages automatically, as shown in the detailed drawing in Figure 2d.
ATTENTION: Ensure the coupling operation is performed correctly and that the security device is engaged as shown in Figure 2d.
UNCOUPLING
Make sure that the trailer brake is on, follow points 1, 2, and 3 above and then move the towing vehicle forward. Coming out of the drawbar eye causes the coupling pin to drop automatically.
NOTE: To ensure secure and efficient functioning, check that during the coupling and uncoupling operations, the drawbar eye is not more than 3 degrees higher or lower than the horizontal axis of the coupling
Maintenance
ATTENTION! Make sure that the coupling pin is down during all maintenance operations.
All moving parts of the coupling are subject to wear. The extent of wear depends on the working conditions and on the maintenance carried out.
After every 15.000
- Check the tightness of the bolts (2-3 in fig.1) to be:
Hole pattern Bolt type Class Torque
120 x 55 M14 10.9 120 Nm
83 x 56 M10 8.8 50 Nm - Lubricate the mechanism through the lubrication nipple (9) in fig. 4 in the technical datalink
- Carry out this operation with the coupling pin (fig. 3b) lifted to avoid over-greasing.
- Lubricate all the moving parts of the security system (3)
List of available ring couplings, tow eyes and ringfeder adaptor
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | 20 × 20 × 20 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
12-inch Electric Brake Shoes
SHOE-12 $38.00 Inc.GSTAdd to cart In Stock -
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock -
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock -
On Sale14% off
Caravan Shock Absorbers suit Jayco
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock -
Pintle Tow Ball Protector – Aftermarket Pintle Hooks
PROTECTOR-509 $48.40 Inc.GSTAdd to cart In Stock -
60mm Jayco Leaf Spring – 705mm
Price range: $87.50 through $97.50 Inc.GSTOptions This product has multiple variants. The options may be chosen on the product page In Stock
Reviews