6t Pintle Hook Receiver Arm

• 6t pintle hook receiver insert allows towing larger trailers up to 5t
• Commonly used on earth-moving vehicles and wood chippers
• A 5/8" or 16mm hitch pin to suit a 5/8 hole is not provided. The image below is our new high tensile 6t receiver pin. The tight fit helps eliminate rattle.
• Note1: Be sure to look at your tow bar rating before usage
• Note2: Exercise care when reversing at acute angles. Breakages can occur at 90 degrees or more.

Couplemate Trailer Parts has designed, tested and manufactured this coupling.

The 50mm tow bar receiver is fantastic for inserting and then replacing with a tow ball version when required.

important towing safety information

• Check the four mounting bolts are tight.
• Check for wear and tear on the ring coupling and attachment bolts.
• Ensure the trailer is level with the tow vehicle when connected.
• Check the safety pin for wear and tear. If worn, replace it immediately.
• Double-check that the safety pin is engaged to lock the horn into the body of the coupling. A loose or worn safety pin will cause the towing connection to disconnect.

Question: Is your 50mm tow hitch rattling?

Answer: The solution is a high-tensile pin. 

Many truck and trailer merchants are around asking, how on earth did you damage your pintle hook?

"Well, I installed your ring coupling equipment following your instructions, and within one month, this equipment is ruined and likely to cause an accident".

Unless you know your trailer, there are many issues customers are unaware of. However, it is not the customer’s fault his equipment is not working as it should; rather, incorrect equipment selection is often the culprit.

Our experts at Couplemate are here to help you select the right equipment.

Purchase other Pintle Hook Mounting equipment here

• Pintle Combination Receiver Arm.
• Pintle Towbar Adaptor 8 Hole, Australian Made.
• Truck Pintle Hooks D-Values are 36.8kN to 84kN.
• Combination Pintle Hook receiver arm | 6t Truck.
• Safety Catch, Chain and Clip.
• Pintle Ring Coupling with a  D-Value of 49kN, Australian Made.

6t Pintle Hook Receiver Arm