60mm Round 2t – 3t Mechanical Disc Braked Axle

60mm Round 2t – 3t Mechanical Disc Braked Axle

60mm round 2t mechanical brake setups are rated to a maximum of 2t on the road for single axles.

Offroad usage in rural or agricultural applications achieves a rating of up to 3t for a single axle. Note: 2t brake calipers are installed on 3t mechanical disc brake assemblies.

Mechanical Disc Braked Axle Kits Include the Following Items

• 60mm Round 2t Galvanised Axle
• Al-ko Mechanical Disc Caliper – 2000kg
• Mechanical Caliper Anchor Plate
• Landcruiser Disc Rotor 2t – Al-ko
• 2t Bearing Kit suit AL-KO Hub/Drums
• 3t Trailer Bearing Kit suit Alko

2t Japanese Caravan Bearing Kit

• Inner ID 50mm, OD 89.96mm – HR30210
• Outer ID 31.75mm, OD 61.95mm – 15123/15245
• Seal ID 60.3mm, OD 89.96mm – 64607
• Dust Cap OD 63.5mm – CM498

3t Japanese Caravan Bearing Kit

• Inner ID 50mm, OD 89.96mm – HR30210
• Outer ID 38.10mm, OD 66.06mm – 29749
• ID 60.3mm, OD 89.96mm – 64607
• Dust Cap OD 76mm – DC3

Couplemate uses Al-ko quality mechanical calipers on all disc brake axle builds.

Still unsure of what measurements to take? Check out this handy guide below:

[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face to hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres

Identifying Bearing Combinations

You will also need to identify your bearing combination which can be done by pulling off a hub and bearings, and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing number.