40mm Square Stub Axle is made in Australia by Couplemate
40mm Square Stub Axle LM Profile. Axles length is measured from tip to tip. Stub Axle supplied with nut, washer and split pin.
Stub Axle supplied with nut, washer and split pin.
Welding a 40mm Square Stub into 50mm tube with 5mm walls makes a very good farm trailer.
Select from an electric or marine turn. Electric turn suits both electric and hydraulic backing plates. Marine turn suits marine or unbraked axles.
LM Bearing Sizes are
- Inner ID 31.75mm, OD 59.10mm
- Outer ID 19.05mm, OD 45.20mm
- Seal ID 37.5mm, OD 59.10mm
- Dust Cap 45.20mm
Rated to 500kg per Axle or 1000kg per pair.
- Tip to Shoulder including thread 115mm
- Square part 135mm
We recommend you use only Japanese Bearings.
It is common to slide 40mm stub axles into 50sq tube and weld into position for use on narrow trailers.
The links below contained a variety of stub axle we manufacture.
- 39mm Round Stub Axle
- 39mm Round Galvanised Stub Axle
- 40mm Square Galvanised Stub Axle
- 45mm Round Stub Axle
- 45mm Round Stub Axle PLL
- Round 45mm Galvanised Stub Axle
- 45mm Square Stub Axle
- 45mm Galvanised Square Stub Axle
- 50mm Round S
- 50mm Square Stub Axle
Couplemate Trailer Parts sells only the best quality 40mm Square Stub Axle and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.
We also ship products to New Zealand via Australia Post Air Express.
© Steve Wotherspoon February 26, 2017. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.
Last Updated on