45mm Square Galvanised Unbraked Axle

$633.00 - $712.50

Couplemate accepts PayPal, Visa and Mastercard.

45mm Square Galvanised Unbraked Lazy Axle

45mm square galvanised unbraked axle or lazy axle is used on tandem axle trailers and has a maximum weight rating of 1600kg in a parallel configuration. Tandem configurations over 750kg have one braked axle.

Australian made and Australian ownedUnbraked axles in a single axle configuration, the maximum rating capacity is 750kg as a result of having no brakes. Tandem axle maximum rating is 2000kg with one axle, braked.

Why Couplemate axles are well-engineered

  • Couplemate galvanises Australian Steel in Brisbane.
  • Australian-made hubs are machined, studded and galvanised by Couplemate.
  • Couplemate manufacturers galvanised axles in-house.
  • Couplemate installs the precision high-quality NSK bearings during assembly.
  • Finally, all axles are tested and double-checked in the final process before dispatch.

Galvanised Unbraked Axle kits comprise:

Our technicians insert NSK bearings into all Galvanised hubs.

Couplemate guarantees its axles to be trouble-free. Consumables such as bearings and seals need to be replaced from time to time. However, the axle profile and machining is the best money can buy.

Replacement trailer parts for braked trailers or unbraked axles are readily available.

Can Caravan Overlay Axles be inverted?

Chrome Dome NutsWhy should I use Dome Nuts?

We sell dome nuts because I had a problem adjusting my bearings for the trip home from the Hawkesbury River.

No problem removing three wheels, however, the fourth wheel refused to move this wheel nut

No amount of leverage would unfreeze the rusty wheel nut.

The wheel nut protruded past the nut and has become rusted.

One of the guests in the caravan park produced a Hilti Rattle gun. To my surprise, it removed the rusty wheel nut immediately.

Available Stud Patterns

  • Ford – Slimline
  • HT Holden – Slimline
  • HQ Holden – Slimline
  • 6 Stud Landcruiser – Slimline
  • 5 Stud Landcruiser – Slimline
  • 6 Stud Landcruiser Parallel
  • 5 Stud Landcruiser Parallel

Trailer Axle Alignment

Installing a new axle into position is quite tricky for novice installers.

Measure the distance from the chassis rail to the back of the hub on both sides. Once correctly aligned, install the u-bolts over the axle.

Alternatively, measure the chassis width of the trailer. This measurement allows us to weld the axle pads onto the axle before delivery. As a result of the installed axle pads, the axle will auto-locate over the spring centre pins.

In seconds, the axle is perfectly aligned and ready for the u-bolt kit to be installed.

Further, more galvanised trailer axles below

Calculating The Correct Axle Measurements

As a result of viewing the video above, calculate the face to face measurement.
  1. Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
  2. Add 50 mm to the offset. Alternatively, choose your own distance between the rubber and the chassis.
  3. Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:

[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face to hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres

How To Measure An Axle

Identifying Bearing Combinations

You will also need to identify your bearing combination which can be done by pulling off a hub and bearings, and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing number.

Where to identify bearing number. Look for the laser engraved number on the bearing.


Finally, if you need help, give team Couplemate a call when selecting trailer spare parts for your boat trailer.

Additional information

Weight70 kg
Dimensions240 × 50 × 50 cm
Stud Patternss

5 Stud Landcruiser – Parallel, 6 Stud Landcruiser – Parallel, Ford (5 x 114.30mm), Holden HT (5 x 107.95mm), Holden HQ (5 x 120.65mm), Land Cruiser 6S, 5s Landcruiser (5 x 150mm)

Axle Profile

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.


    Be the first to review “45mm Square Galvanised Unbraked Axle”

    Your email address will not be published. Required fields are marked *