50mm Square Hydraulic Disc Brake Axle

$1,467.00 - $1,482.00

Couplemate - Engineered For Quality

Couplemate accepts PayPal, Visa and Mastercard.

50mm Square Hydraulic Disc Brake Axle

50mm square hydraulic disc brake axle kits are for use on boat trailers due to their anti-corrosive characteristics.

The 50mm square hydraulic axle assembly is our most popular seller.

This axle group is rated

Boat trailers use hydraulic disc brakes due to the anti-corrosive characteristics of galvanised disc braking system.

  • All Couplemate marine disc braked axles are Australian-made and galvanised.
  • Did you know Couplemate have a lifetime warranty against faulty craftsmanship?
  • However, this warranty does not cover consumables such as bearings and disc pads.

This kit includes:

Couplemate has disc braked axles to suit the following wheel stud patterns

  • Ford SL
  • HT Holden SL
  • HQ Holden SL
  • Commodore SL
  • 5 Stud Landcruiser SL
  • 6 Stud Landcruiser SL

Purchase 2t American Stainless Rotor and Caliper setups here

Calculating The Correct Axle Measurements

  1. Measure the offset wheel. The wheel offset is the distance between the hub’s inside, and the rubber’s outside.
  2. Add 50 mm to the offset. Alternatively, choose the distance between the rubber and the chassis.
  3. Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:

[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face-to-hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres

How To Measure An Axle

Identifying Bearing Combinations

You will also need to identify your bearing combination by removing the hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.

Where to identify bearing number. Look for the laser engraved number on the bearing.

Additional information

Weight90 kg
Dimensions240 × 60 × 60 cm
Stud Patternss

5 Stud Landcruiser – Parallel, 6 Stud Landcruiser – Parallel, Ford (5 x 114.30mm), Holden HT (5 x 107.95mm), Holden HQ (5 x 120.65mm), Holden Commodore (5 x 120mm), Land Cruiser 6S, 5s Landcruiser (5 x 150mm)

Face to Face Length

1325mm, 1350mm, 1375mm, 1400mm, 1425mm, 1450mm, 1475mm, 1500mm, 1525mm, 1550mm, 1575mm, 1600mm, 1625mm, 1650mm, 1675mm, 1700mm, 1725mm, 1750mm, 1775mm, 1800mm, 1825mm, 1850mm, 1875mm, 1900mm, 1925mm, 1950mm, 1975mm, 2000mm, 2025mm, 2050mm, 2075mm, 2100mm, 2125mm, 2150mm, 2175mm, 2200mm, 2225mm, 2250mm, 2275mm, 2300mm, 2325mm, 2350mm, 2375mm

Axle Profile

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “50mm Square Hydraulic Disc Brake Axle”

    Your email address will not be published. Required fields are marked *