1" Axle Washer by Active Fabrications to fit non-AF drums

1" Axle Washer is designed by Active Fabrications to fit Al-ko and Couplemate 10" parallel drums onto their axles.

Example, an Al-ko drum will not fit correctly on an AF turned axle unless you are using these washers.

The bearings cannot be pre-loaded or otherwise adjusted without this washer in place.

Do you find that you have tightened up the axle nut as far as you can and the hub is still not tight? The only thing you can do is call us and get a few of these specially machined washers.

Your trailer, caravan or camper will not go far if you have not found this solution.

Finally, other associated parts can be found at these links.

• 5mm Split Pin
• 12TPI Axle Nut
• 14TPI Axle Nut - Alko
• 1" Standard Washer