G&S Chassis 60mm Tandem Rocker long suits 60mm wide tandem eye to eye springs. The 245mm is a reference to the distance between outer holes on the rocker arm.
5/8 or 16mm centre greasable shackle pin and the two extremely 16mm pins.
Shackle plates are generally placed on the rear of each spring however this rocker requires shackle plates to be attached to the rear of the front spring and the rear of the back spring.
To properly locate the front and back holders follow these instructions.
- Locate your centre hanger.
- Measure the spring from the centre of eye to centre of the eye. Example, 710mm
- Measure from the rocker eye and add (spring length) 710mm then add 25mm and clamp the hanger into position.
- Repeat the process for front and back hangers.
The open part of this tandem rocker arm points towards the rear of the trailer.
G&S Chassis 60mm Tandem Rocker