Galvanised Multi-Fit Rim
Galvanised multi-fit rim to suit HT and Ford stud patterns in 13″ and 14″ configurations.
Multi-Fit rims are available in 4 sizes and ideal as a spare wheel for your boat or box trailer. Interchange wheels effortlessly between trailers.
Rim offset is zero.
- Holden HT – 4.25″
- Ford – 4.5″
- Holden HT – 5 x 7/16″ UNF
- Ford – 5 x 1/2″ UNF
- 13″ – 155, 165, 175 tyres
- 14″ – 185, 195 tyres
Multi-fit wheels are designed to fit only these size stud patterns.
When in doubt about stud patterns the following examples are a good guide.
- Most Australian boat trailers use HT Holden Stud pattern with LM67048 and LM11949 bearing sets.
- Whereas American trailers use a Ford Stud pattern. However, the wheel bearings on US trailers a different to Australian Ford.
- LM68149/110 is Australian and LM68149/111 is the US model. The outer ring has a slightly larger OD.
It is our experience that the end of the stud protrudes through the nut and rusts.
Wheel nuts on studs are near impossible to remove.
Retail customers only.
Finally, Couplemate Trailer Parts recommends the use of lug nuts on all boat trailer wheels. We have a good article on lug nuts here.
Couplemate Trailer Parts sells only the best quality Galvanised Multi Fit Rim Suits HT or Ford 13″ – 14″ and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.
We also ship products to New Zealand via Australia Post Air Express.
© Steve Wotherspoon January 18, 2019. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.