Caravan and Trailer Wheel Studs

$2.75$18.64

SKU: N/A Category:
Couplemate accepts PayPal, Visa and Mastercard.

Caravan and Trailer Wheel Studs from 7/16 inch to 5/8 inch short and long knurl

Caravan and trailer wheel studs from 7/16 inch: Holden UNF to 7/8 inch. This section does not include lug nuts or mag wheel nuts.

The most common request we get is for a metric stud conversion, especially 14mm studs to replace 9/16″ Landcruiser studs.

Did you know that Alko wheel studs are high tensile steel?

Yes, however, high tensile steel studs still require checking each morning when travelling. Wear and tear from rough roads has disastrous results as can be seen from the image below.

How do wheel studs become loose?

Firstly, we rarely see loose wheel studs caused by faulty manufacture. It is important to note that all wheel nuts are tightened correctly.

One loose wheel nut often results in all the wheel nuts becoming loose.

Long distance travel and corrugated road travel mandate checking the tightness of wheel nuts every morning before breaking camp.

Loose Axle U-bolts cause Highway Havoc

We are also able to supply custom-made 10″ drums and unbraked hubs.

If the wheel stud is not located here, give one of our experts a call on 0733483822 and we will try and source it for you if we can.

Download our Caravan Wheel Stud Selection Sheet

wheel studsIs wheel stud sheer common?

Yes, worn wheel studs are more common on caravans than trailers.

The left is a simple example of sheer where the studs can simply be replaced.

Most reputable caravan and trailer repairers carry wheel studs for common hubs and drums like ford, Landcruiser and holden.

In cases where the stud is loose in the hub or drum, the entire part needs replacement.

Hole size is critical for the stud knurl to lock itself into position therefore any sign of a loose fit can be expensive.

It is also a good idea to tighten the wheel nuts on your spare wheels. It is not uncommon to lose a wheel on rough trips.

Finally, stripping wheel nuts is uncommon, we just do not see it occur with high tensile equipment. The stud will sheer before a nut will strip its thread.

wheel nut indicatorHow can I identify loose wheel nuts?

A very cheap and easy solution to identify loose wheel nuts are plastic wheel nut indicators.

These indicators slide over the wheel nut and provide a positive indication should the nut move.

Purchase wheel nut indicators here.

Early Holden to HT (150mm Hubs)

  • 7/16 Inch UNF studs
  • 5 Studs, 4.25-inch PCD (107.95mm)
  • 63.5mm between adjacent studs
  • Short Knurl
  • Knurl Diameter 13.78
  • Length under Head: 41mm
  • Hole Size: 13.5mm
  • Knurl Length: 5mm

Holden HQ onwards (150mm Hubs)

  • 7/16 Inch UNF studs
  • 5 Studs, 4.75″ PCD (120.65mm)
  • 70.9mm between adjacent studs
  • Short Knurl
  • Length under Head: 41mm
  • Hole Size: 13.5mm
  • Knurl Length: 5mm

Ford Standard (150mm Hubs)

  • 1/2 inch UNF studs
  • 5 Studs, 4.5″ PCD (114.3mm)
  • 67.2mm between adjacent studs
  • Short Knurl
  • Length under Head: 41mm
  • Hole Size: 13.5mm
  • Knurl Length: 9mm

Ford Industrial Short Knurl (190mm Hubs)

  • 1/2 inch UNF studs
  • 5 Studs, 4.5″ PCD (114.3mm)
  • 67.2mm between adjacent studs
  • Length under Head: 41mm
  • Hole Size: 13.5mm
  • Knurl Length: 5.5mm

Ford Long Knurl Industrial (2 Piece Drums)

  • 1/2 inch UNF studs
  • 5 Studs, 4.5″ PCD (114.3mm)
  • 67.2mm between adjacent studs
  • Long Knurl Industrial
  • Length under Head: 57mm
  • Hole Size: 15.5mm
  • Knurl Length: 21mm

Dexter Short Wheel Stud

  • 1/2 inch UNF Stud
  • 20 UNF (20 tpi).
  • Knurl Size 13.7mm
  • 33mm Thread Length
  • 62mm Long
  • Hole Size 13.5mm
  • Knurl Size 13.7mm
  • Head to thread length: 16mm

Dexter Long Wheel Stud

  • 1/2 inch UNF Stud
  • 20 UNF (20 tpi).
  • 33mm Thread Length
  • 67mm Long
  • Hole Size 13.5mm
  • Knurl Size 13.7mm
  • Head to thread length: 35mm

12mm Wheel Studs

  • 41mm Long
  • Knurl: 9mm
  • Hole size 12.7mm
  • Knurl 12.5mm
  • Head thickness: 4mm

Landcruiser Short Knurl

  • 9/16 inch NF
  • Short Knurl
  • Length under Head: 50mm
  • Hole Size: 15.5mm
  • Knurl Length: 12mm

Landcruiser Long Knurl

  • 9/16 inch UNF
  • Long Knurl
  • Length under Head: 57mm
  • Hole Size: 15.5mm
  • Knurl Length: 22mm

14mm Short Knurl

  • 52mm Long
  • 11mm knurl
  • Head Thickness: 4mm

14mm Long Knurl

  • 57mm Long
  • 22mm knurl
  • Head Thickness: 6mm

5/8 inch Long Knurl

  • 5/8 inch UNF
  • Long Knurl
  • Length under Head: 57mm
  • Hole Size: 17.5mm
  • Knurl Length: 22mm

5/8 inch Short Knurl

  • 5/8” UNF
  • Special – Short Knurl
  • R/Rover 10” electric
  • Length under Head: 51mm
  • Hole Size: 17.5mm
  • Knurl Length: 12mm

7/8 BSF Short Knurl Truck Stud

  • 7/8 inch BSF
  • Short Knurl
  • Length under Head: 63mm
  • Hole Size: 23.5mm
  • Knurl Length: 17mm

7/8 BSF Long Knurl Truck Stud

  • 7/8 inch BSF
  • Long Knurl
  • Length under Head: 70mm
  • Hole Size: 23.5mm
  • Knurl Length: 23mm

There is an excellent article on lug nuts here.

Review associated equipment

Additional information

Weight0.2 kg
Dimensions4 × 2 × 2 cm
Wheel Studs

5 Stud Landcruiser 14mm – Long Knurl, 5 Stud Landcruiser 14mm – Short Knurl, 5 Stud Landcruiser 9/16" – Short Knurl, 5 Stud Landcruiser 9/16" – Long Knurl, 5 Stud Landrover Short Knurl, 5/8" Long Knurl, 7/16" Short Knurl, Dexter 1/2" Long, Dexter 1/2" Short, Ford 1/2" Standard Knurl, Ford 1/2" Short Knurl Industrial, Ford 1/2" Long Knurl Industrial l, M12 x 1.5mm Pitch – 41mm, M12 x 1.5mm Pitch – 51mm

Reviews

    Be the first to review “Caravan and Trailer Wheel Studs”

    Your email address will not be published. Required fields are marked *