Couplemate Trailer Parts.
Couplemate Trailer Parts.

2t Hydraulic Disc Braked Axle

$1,545.00$1,614.75

Enter the Face-to-Face length of your axle. (mm).
Please enter a number from 1000 to 2310.

Shipping

Select delivery location

Couplemate accepts PayPal, Visa and Mastercard.

2t Hydraulic Disc Braked Axle

The 2t hydraulic disc braked axle kit utilises a 50mm square galvanised to form the basis of the boat trailer setup.

The 50mm square hydraulic braked axle kit is a robust choice, and when you use it in tandem, extend the rating 4.5t.

Important: Axle pads locate and centre the axle of the trailer springs. Please advise the outside chassis width of your trailer. We are then able to weld axle pads into the correct position. This service is not included in the price as some customers do not require this service.

The axle kit consists of the following:

Galvanised axle kits have almost zero chance of rusting.

Purchase galvanised Rocker Rollers here.

Calculating the face-to-face measurement on your axle is important to know whether this would be the right fit. Here’s how you can do it:

  1. Measure the whole wheel offset, that distance between the inside of the hub inside the rim and outside of the rubber
  2. Measure the distance between the chassis and rubber or add 25 mm
  3. Add the chassis width by multiplying the number by 2

Technical Specifications

  • Weight –  120 kg.
  • Dimensions – 200 x 30 x 30 cm.

Visit our website for other types of marine braked axle kits like 45 mm square mechanical override disc brake axle kit, hydraulic disc brake axle kit – 45mm square, and even Landcruiser hydraulic disc braked axle kits. At Couplemate, we also offer U-bolt kits, tow hitch, and caravan trailer locks, to name only a few.

Calculating The Correct Axle Measurements

  1. Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
  2. Add 50 mm to the offset. Alternatively, choose your own distance between the rubber and the chassis.
  3. Multiply by 2 for both sides. Add your chassis width to the above number.

0

Still unsure of what measurements to take? Check out this handy guide below:

[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face to hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres

How To Measure An Axle 2t Hydraulic Disc Braked

Identifying Bearing Combinations

You will also need to identify your bearing combination which can be done by pulling off a hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.

Where to identify bearing number. Look for the laser engraved number on the bearing.

Additional information

Weight70 kg
Dimensions240 × 60 × 60 cm
Stud Pattern

5 Stud Landcruiser, 6 Stud Landcruiser

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “2t Hydraulic Disc Braked Axle”

    Your email address will not be published. Required fields are marked *

    Welcome

    Login and shop for our trailer parts to enjoy a faster checkout experience.

    High-Quality Trailer Parts

    Couplemate™ Core Range

    Couplemate Trailer Parts.

    About Us

    Contact Info

    Trade & Wholesale

    Australian Made

    Australian Made

    FAQ