60mm Outback Spring Bush
Price
$9.50 Inc.GST
Shipping
Brand: Couplemate
High-tensile steel for increased durability.
60mm Outback Spring Bush | High-Tensile Steel
The 60mm outback spring bush is a durable trailer replacement for the worn AL-KO spring bushes. Steel bushings outperform nylon bushings in extreme locations, hence the demand for greaseable steel bushes.
The Couplemate™ CM657 is a suitable replacement part for the AL-KO part number 590633 and is Australian-made.
Product Specifications
The dimensions of our 60mm high tensile outback spring bush are as follows:
- ID: 16mm
- OD: 22mm
Greaseable shackle bolts lubricate the steel bushes in outback springs and steel shackle hangers. They must be checked regularly and greased when necessary.
When checking your rig, it is good practice to remove the shackle pin to check both the hanger and bolt for wear.
Bush Installation
- Place the steel bush over the top of the steel or nylon bush.
- Use the new bush and tap with a hammer until the old bush is pushed out of the spring.
Greasable pin and shackle kit installation method
- Remove the old shackle pin and check for wear.
- Use the steel bush as a punch to knock out the old bush.
- Tap in the new bush.
- Remove the grease nipples and tap in the shackle bolt kit.
- Tighten until the spring does not move.
- Loose off the nut 1/4 of a turn to remove the tension of the spring pack.
- The spring should now be free to swing forwards and backward.
Finally, we recently released ElectroGal shackle plats to suit 60mm shackle plates as spare parts.
Alternatively, upgrade to a high-tensile steel bush and greaseable shackle pins. Additional outback parts are located below.
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 6 × 4 × 4 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock -
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock -
On Sale14% off
Caravan Shock Absorbers suit Jayco
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock -
Pintle Tow Ball Protector – Aftermarket Pintle Hooks
PROTECTOR-509 $48.40 Inc.GSTAdd to cart In Stock -
60mm Jayco Leaf Spring – 705mm
Price range: $87.50 through $97.50 Inc.GSTOptions This product has multiple variants. The options may be chosen on the product page In Stock -
Tray Back Camper Landing Leg Stand
JACK-1.4M $260.00 Inc.GSTAdd to cart In Stock
Reviews