7/8″ Hydraulic Trailer Master Cylinder – 313007

SKU: HYDRAULIC-001-7/8 Category: Brake Caliper Repair Parts Tags: Hydraulic, Master Cylinder Brand: ECTBS

7/8&Quot; Hydraulic Trailer Master Cylinder - 313007

Price

$35.95 Inc.GST

10 in stock

Suits: 2000kg override couplings that tow tandem axle trailers.
Wheel Compatibility: Best suited to 14-inch, 15-inch and 16-inch wheels.

Shipping

Select delivery location

7/8″ Hydraulic Trailer Master Cylinder

Hydraulic trailer master cylinder, 7/8 inch to suit 2000kg override couplings that tow tandem axle trailers. Best suited to 14-inch, 15-inch and 16-inch wheels.

Bled and adjusted brakes are the key to an efficient hydraulic braking system. Once the brakes have been bled, tighten the nut on the back of the brake lever.

Fitting Instructions

Fit the master cylinder bracket on the rear bolt mounts.
Bolt hole mounts are 54mm between centres.
Select 1/2-inch bolts that bolt right through your bracket, coupling and draw bar.
Disconnect the parking brake.
Adjust the lower nut 2mm from the back of the override, then lock it off.

A zinc bracket is required for hydraulic braking systems.

How Much Free Play: Our Advice

How Much: You must have at least 2mm free play – between 2mm and 5mm – when the hydraulic brake pads start to wear.
If there is no free play: As soon as the brakes start to work and get a little warm, you will begin to get brake build-up. This increases heat and burns out your brakes, or even pops the seals in the master cylinder

What type of brake fluid should I use?

DOT 3 or DOT 4 should be used in your boat trailer. This type of hydraulic oil does not absorb water, but the silicone in DOT 5 can cause seals to swell and bind up caliper pistons.

Hydraulic Master Cylinders and Replacement Parts

There are no FAQs for this product.

Additional information

Weight	1 kg
Dimensions	20 × 12 × 8 cm

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.