Price
Price range: $7.95 through $11.24 Inc.GST
U-bolt is available from 75mm to 200mm lengths. Add roughly 13mm to your length for the spacer plate and nut/washer.
✓ Galvanised U-bracket with 60mm thread length.
✓ Includes 2 x Galvanised Nyloc nuts (1/2″ BSW).
✓ Also available in a U-bolt clamp kit.
All dimensions (length, width) are the internal U-Bolt measurements.
Shipping
100mm Square Galvanised U-Bolts Including Hardware
100mm Square Galvanised U-Bolts can be used for a range of projects.
Our customers often use these U-bolts, which come in various leg lengths, to secure jockey wheels to their caravan chassis or boat trailer.
Specifications: 100mm Square Galvanised U-Bolts
- 75mm Long
- 100mm Long
- 125mm Long
- 150mm Long
- 200mm Long
How to measure U-bolts
- Measure u-bolts from the inside of the bolt. Example. 75mm u-bolts fit 75mm drawbars or chassis rails.
100mm Square Galvanised U-Bolts Include
- Galvanised Nylocs
- Zinc washers
Trailer Spare Parts News Articles
- Why U-bolts could be the primary cause of accidents.
- Incorrectly tightened U-bolts on a truck chassis can lead to catastrophic failure.
Galvanised U-bolt clamp kits
Frequently Asked Questions & Installation Guide
- ✔What are they used for? Ideal for securing jockey wheels, spare tyre carriers, and suspension parts to 100mm square trailer or caravan chassis.
- ✔Are they rust-resistant? Yes, the hot-dipped galvanised finish offers high corrosion protection in harsh marine and boat trailer environments.
- ✔What does the kit include? Each U-bolt comes complete with matching flat washers and secure Nyloc nuts or spring washers.
👍 The Do’s
- Measure first: Check your chassis or tube width to ensure a perfect 100mm square fit before ordering.
- Tighten evenly: Crank down both sides bit by bit to maintain even alignment and clamping pressure.
- Recheck load: Tighten your nuts again after your initial trip to settle the load safely.
👎 The Don’ts
- Don’t reuse worn parts: Discard old U-bolts showing heavy rust, deep cracks, or stripped threads.
- Don’t force fit: Avoid using square-bend bolts on round axle setups, as they will not clamp properly.
- Don’t over-torque: Avoid using aggressive impact wrenches that might strip the galvanised threads.
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 12 × 10 × 2 cm |
| Bolt Diameter | 12.7mm |
| U-Bolt Width | 100mm |
| Stud Thread | 1/2" BSW |
| Fastener Type | U-Bolt |
| Coating | Galvanised |
| Torque | 1/2-inch – 60Nm |
| U-Bolt Length | 75mm, 100mm, 125mm, 150mm, 200mm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Only logged in customers who have purchased this product may leave a review.










Reviews