Al-ko Long Shock Absorber – Highway and Offroad
Al-ko Long Shock Absorber suit axles up to 2000kg. Suit Enduro, standard beam, overlay and drop axles.
Replace shock absorbers when they lose compression. Compression loss occurs when the cylinder has been ruptured and suffers a loss of gas or oil.
Remove the shocky and manually compress to test. Enduro suspension has 2 shockys on each side of the camper.
Note: This is a replacement part for Alko suspension systems only. Warranty may be voided if installed on non-Enduro suspension systems.
Highest Standards In Development Testing & Safety
Engineered in Australia and manufactured in Spain, AL-KO’s premium heavy-duty shock absorbers have been rigorously pressure tested. Results show little to no bush deformation or wear, significantly less dampening degeneration, superior heat dissipation and a failure point 40 degrees higher than that of competitor products tested. From the blacktop to the cape, AL-KO’s Premium Heavy Duty Shock Absorbers give you the best durability, control and comfort to conquer any terrain type you may encounter.
- Open Length 470mm
- Closed Length 310mm
- 12.2mm Bolt Hole
- Suits 35mm Bracket
When installing this shock absorber set at 390mm to allow maximum spring compression and rebound.
Not suited to Al-ko IRS axles.
Purchase standard replacement shock absorbers here
- IRS Shock Absorber
- Caravan Shock Absorbers
- Cruisemaster Shock Absorber
- Caravan Shock Absorbers plus Hanger Kit
- Shock Absorber Bottom Bracket
- Shock Absorber Mounting Kit
Couplemate Trailer Parts sells only the best quality Al-ko Long Shock Absorber – Enduro and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.
We also ship products to New Zealand via Australia Post Air Express.
© Steve Wotherspoon July 6, 2020. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.